Hola a todos!
Estube armando un diseño de un proyecto con pic en Proteus. Lo quiero simular y me salta el siguiente log:
No se como solucionarlo.
Espero que me puedan ayudar...
Desde ya, muchas gracias.
Estube armando un diseño de un proyecto con pic en Proteus. Lo quiero simular y me salta el siguiente log:
SIMULATION LOG
==============
Design: F:\I.U.A\Tecnicas Digitales\Tecnicas Digitales II\Ro\PIC.dsn
Doc. no.: <NONE>
Revision: <NONE>
Author: <NONE>
Created: 11/23/08
Modified: 11/23/08
Compiling source files...
Build completed OK.
Compiling netlist...
Linking netlist...
Partition analysis...
Simulating partition 1 [CC32827E]...
Animation started sucessfully...
PROSPICE Release 6.9 SP1 (C) Labcenter Electronics 1993-2005.
SPICE Kernel Version 3f5. (C) Berkeley University ERL.
Reading netlist...
Reading SPICE models...
Building circuit...
Instantiating SPICE models...
[U?] PIC16 model release 6.9 SP0 simulating PIC16627 device.
[U?] Loaded 128 bytes of persistent EEPROM data.
[U?] Loading HEX file 'wally.HEX'.
[U?] Read total of 144 bytes from file 'wally.HEX'.
[U?] Loaded 72 program words and 0 data bytes.
[SPICE] transient GMIN stepping at time=9e-06
[SPICE] transient GMIN stepping at time=9e-06
[SPICE] Error 106 - TRAN: Timestep too small; time = 9e-06, timestep = 1.25e-19: trouble with node "#00010"
.
Totaliters=12160, Totalsteps=32, Goodsteps=22, Badsteps=10
Real Time Simulation FAILED.
No se como solucionarlo.
Espero que me puedan ayudar...
Desde ya, muchas gracias.