Gracias betodj, gracias a tu ayuda y a información que he encontrado en otros foros he conseguido solucionar el problema. Pongo aqui, de forma general como se ha solucionado, con la intención de que a alguien le sirva de ayuda. Tengo que decir que de todas formas se me ha generado otro error. Lo que he hecho es lo siguiente:
1. Botón derecho en el elemento. EDIT PART
2. Miro cada una de las puertas y me las apunto en un papel (debido a mi falta de memoria)
3. Doble click. Añado PSpiceTemplate, y pongo X^@REFDES %G %D %S @MODEL. El cuerpo de la sentencia es igual siempre, se pone %nombre_de_la_puerta tantas veces como hace falta. Puede ser que X, la primera letra sea la causa de mi error y se debe averiguar cual se debe usar.
4. Como se dice en mi tierra " Dit i fet" ya está solucionado.
Ahora se me crea otro error ERROR: [NET0085]
Part Q1 has no 'MODEL' property
Buscaré por mi cuenta la solución. Si alguien sabe como solucionarlo, porfavor que me lo indique, yo buscaré por mi parte e intentaré colgar la solución.
Ahora hos pongo aqui otra forma de solucionar el error 93 que encontré por internet:
1. Open up the part properties window.
2. Look for the "PSpiceTemplate" property.
-If it isn't there, add the property.
3. Next, you'll need to fill in the property with the information that is required by the spice model. You can usually see that by looking at the first (non-comment) line of the model in the library. You can also open a similar type of part from one of the PSPICE libraries to look at the correct syntax. My template (op amp) looks like this: "X^@REFDES %+ %- %V+ %V- %OUT @MODEL".
4. At this point, my model is not yet working but I'm getting a different error [NET0077] "Pin + in template not found on U7". This part can be fixed by editing the part model to name the pins correctly.
5. (if you got the NET0077 error) Open up the part from the part library (not the PSpice library) and change the pin names to match what you're feeding to the PSpice template (eg. pin 1 = "+", pin 2 = "-", pin 3 = "V+", etc.).
6. Update the design cache. Since the part is now updated in the library, I need to open up my project window, select the part in the "Design Cache" and Right-click -> Update Cache. Now my design should have the correct pin names.
Mucha suerte a todos y gracias